2016年8月31日星期三

How to Install Underground Drip Irrigation Pipe

How to Install Drip Irrigation Pipe. Installing underground irrigation pipe is the single biggest step when installing an automatic sprinkler system around your yard. The most common pipe used for this task is made of white PVC (polyvinyl chloride) and has an average usable life of 15 to 20 years before it needs to be replaced. The irrigation system will need to be well maintained in order for it to last that long, and repairs will need to be made along the way. But before any of that, the pipe must be connected, buried and used for its intended purpose.
Things Needed
Ground marking paint
PVC pipe
PVC pipe fittings
Trenching machine
Trenching shovels
PVC cutters
PVC primer
PVC glue
Hand tamper

Step 1

Plan the layout of your irrigation system. Study the layout of the landscape that will be irrigated and plan accordingly. There are many sprinkler supply companies that suggest ways to complete this, and plans are best accomplished according to the sprinkler manufacturer’s recommendations. There can never be too much irrigation system planning before you begin digging trenches.

Step 2

Mark the paths of the irrigation pipe with a can of ground marking paint. Call your utility companies to have them mark the utility lines that run through your yard. In many jurisdictions, you are required by law to do this.

Step 3

Dig trenches for the irrigation pipe that will be deep enough to avoid frost line issues in your area. Trenches can be dug by hand or with a trenching machine. Trenching machines are much faster and can be rented for a few hours or for a few days, depending on your needs and local availability. If you use a trenching machine, it is still wise to use trenching shovels to maintain the trenches during the installation process.

Step 4

Lay the pipe into the trenches. Cut the PVC pipe with PVC cutters and connect the pipe as you go according to your specific installation plan. PVC fittings are needed to create a fully customized installation. The different fittings you will need include tees, 90-degree elbows, 45-degree elbows, couplings, threaded nipples and sprinkler heads. Assemble these fittings and the pipe together using PVC primer and adhesive. Allow the glue to dry and cure before burying the pipe.

Step 5

Leave all fitting joints exposed after all of the fittings and pipe have been installed. Pressurize the system with irrigation water and check all of the fittings for water leaks. Replace the leaky joints as needed before burying the pipe.

Step 6

Bury the pipes after the fittings have been tested and no leaks have been found. The soil should be packed with a hand tamper. If you do not have access to a hand tamper, walk over the soil-filled trenches to pack the soil. Do not leave the trenches loosely filled. The soil will settle eventually and may settle unevenly. Packing the soil will speed the settling process.

Warnings
If you live in a climate that gets pretty cold, call your county extension office to find out how deep the frost line penetrates into the ground. If you bury the PVC pipe below this level, you will have little, if any, chance of having to replace frozen irrigation lines.

Use of pvc drainage pipe

Pipe scope : 16-630mm
Weight: 10T
Suitable: pvc upvc
Power:110-360KW
motor:simens
condition: new
type:PVC pipe production line,pvc pipe extrusion line
application:1. Water supply and drainage pipelines in building;
2. Rainwater drainage pipelines in building;
3. Electrical wiring pipe in building;
4. Air conditioning condensate water systems.
 Certification: CE UL CSA
 Screw material:38Cr2MoAlA
pvc drainage pipe Applications:

1. Water supply and drainage pipelines in building;
2. Rainwater drainage pipelines in building;
3. Electrical wiring pipe in building;
4. Air conditioning condensate water systems.

Use of pvc drainage pipe

Description:

1. The line is mainly used in the manufacture of PVC pipes with various diameters and wall thickness in the
aspects such as the agricultural and constructional plumbing, cable laying etc.
2. This set is composed of the conical twin-screw extruder, vacuum calibrating tank, haul-off, cutter, stacker
or belling machine etc.
3. The extruder and haul-off adopt the imported AC frequency control device.
4. The haul-off has different specifications, such as two-claw, three-claw, four-claw, six-claw etc.
5. The cutter may choose the saw blade cutting type or the planetary cutting type.
6. The unit is of reliable performance and high production efficiency.

2016年8月29日星期一

Drip Irrigation for Landscape and Garden

Thousands of acres of crop production money, is now working with drip irrigation only. Agricultural irrigation system is now approaching 40 years of history, since early experiments began in Israel. Now, through the use of agricultural experience can now be for the owners to better irrigate trees, shrubs, flowers, vegetable gardens, ground cover, potted plants and hanging plants. Drip irrigation is the growing number of houses, roads and street refuges, and highway beautification discovery, to name a few. As the public has been faced with a sharp increase in the cost of water and increased water use drip irrigation.

drip irrigation system
Drip now offers an exciting concept homeowners watering plants, not only saves water, but also accelerate the growth of plants. Drip irrigation is a very successful adaptation and use in a variety of climatic conditions, soil type, plant and planting methods.

Utilizing a drip irrigation system involves the installation of a permanent plant watering system that enables the homeowner to place water where it is wanted, and in the exact amount that is necessary for optimum plant growth. Drip irrigation systems range in size from a few plants to several thousand acres, and permits the cultivation of slopes previously thought unusable and land left idle. In fact, the more difficult the installation, the greater the advantages of drip irrigation.

Of all the irrigation methods, drip irrigation is the most efficient. Sprinklers shoot water into the air, where much of the water is lost to evaporation and never reaches the plant. Flood irrigation transports the water in open trenches to the soil where the planting gets about half of the water supplied. Sprinklers are more efficient than flood irrigation, with only about one fourth of the water lost, but drip irrigation results in losses of less than 10 percent of the supply. With the water supply getting lower and lower throughout the country and the world, the conservation of this precious commodity by drip irrigation may eventually be the difference between adequate food and famine, or green yards and dirt.

In short, drip irrigation system is the slow and precise delivery of water to chosen plantings. This is achieved by the use of flexible polyethylene tubing or PVC pipe with devices for dripping water (emitters) and low-volume sprays, drip tape, Laser Soaker Line, or Porous Pipe systems. The systems are easy to install, requiring no trenching and only shears for cutting polyethylene hose or tubing, and PVC pipe cutters for cutting PVC pipe. A hole punch is required for installing an emitter into the polyethylene hose. Drip irrigation can maintain near perfect moisture levels in the root zone of the plants, avoiding the too wet/too dry swings typical of overhead watering. Drip irrigation systems can be controlled manually or by the use of an automatic timer in conjunction with a tensiometer, and can be used to apply fertilizers directly to the roots of plants.

2016年8月28日星期日

High Qulity Agriculture Irrigation Pipe

High Qulity Agriculture Irrigation Pipe
1.single screw extruder(with auto loader)
2.mould
3.water tank
4.haul off machine
5.fiber winding machine
6.oven case
7.single screw extruder(with auto loader)
8.mould
9.water tank
10.haul off machine
 Agriculture Irrigation Pipe
11.winder

Main usage
The PVC Fiber Enhancing Soft Pipe , also called grridding pipe and snakeskin pipe which is mainly used to convey the middle pressure or corrosive gas and liquid , it is widelyused in such areas as mechanical engineering , coal mine , petroleum , chemical industry , agriculture irrigation , civil application(solor energy water heater , gas-jar) , also it can be used in irrigating garden and lawn.

ExtruderSJ65/28SJ45/30
Diameter Range(mm)Φ12-Φ50Φ6-Φ14
Output40-7520-40
Installed Power(KW)5035
Main ExtruderSJ65/28SJ45/28
Diameter Range(mm)Φ16-Φ50Φ6-Φ14
Output40-7520-40
Producing speed4-8m per min
Installed Power(KW)5035

pvc drainage pipe

Pvc Drainage Pipe Performance
1. Strong anti-pressure ability
Both high shock resistance heavy pipe series and high shock resistance medium-sized pipes series bear strong pressure. They can be paved in the concrete in a concealed or open
 manner and do not break due to pressure. The heavy pipe series are especially suitable for paved
in the tamped or shaking concrete.
2. Corrosion preventive and anti-pest
PVC pipes have the performance to resist the common acid and alkali. In addition, the PVC pipe
contains plasticizer, so there is no insect and mouse pest.
3. Excellent flame retardant property
When the PVC pipe is taken away from the fire after being burnt, the natural flame will give out
pvc drainage pipe
 immediately to avoid the expansion of fire along the pipe. At the same time, as its heat conductivity is poor, it can protect the wire for a long period time in the situation of fire disaster to ensure the operation of control system of the electrical appliance and facilitate evacuation of personnel.

4. Excellent insulation performance
It can bear high voltage surface and is not breakdown, effectively avoid danger of creepage and shock.
5. Simple construction
A. Light weight: one fifth of the weight of steel pipe, convenient to vehicle transportation
and manual transport, light and labor saving during construction.
B. Easily bent: as long as a section of bending spring provided by this company is inserted
inside the pipe, manual bending can be conducted at room temperature.
C. Convenient cutting and connection: use of the pipe cutter provided by our company can
 cut PVC pipe with diameter less than 32mm. Using the adhesion agent and relevant accessories
produced by our company can connect the PVC pipe to the shape needed quickly.

2016年8月26日星期五

pvc drainage pipe supplier

pvc drainage pipe supplier
pvc drainage pipe is formed by the addition of high-density polyethylene (HDPE) other additives exterior corrugated plastic drainage pipes new permeability, permeable corrugated pipe is perforated by at recess, tube four weeks outsourcing geotextile processing.

Bellows can be divided according to the type of single-wall and double-wall corrugated pipe permeable permeable bellows. As the product of the hole in the trough and is elongated, effectively overcome the flat products susceptible to plugging the hole affect the drainage effect of disadvantages for different drainage requirements, the pore size can be 10mm × 1mm-30mm × 3mm, and can be 360 ​​degrees, evenly distributed within the range of 270 degrees, 180 degrees, 90 degrees, widely used in highway, railway roadbed, the subway project, waste landfill, tunnels, green belts, playgrounds and water content bias drainage slope protection and other fields caused by high, and underground irrigation and drainage systems in agriculture, horticulture it. It soft water pipe, plastic blind ditch has become China Civil Engineering Construction (seepage, drainage) in three major products. Municipal sewer drain pressure depends on the size of the network, the choice of arms and straight wall tube bellows. Straight wall pipe pressure bearing ability, can be used for large-scale drainage outfall pipes dedicated network.

what is the difference of water supply pipe and drainage pipe

what is the difference of water supply pipe and drainage pipe
Drain is used for drainage, such as drainage, rainwater drainage and other residential real estate projects. Drain pipe itself no pressure, no pressure, and no requirement for health indicators, if you want to distinguish the pipe quality good or bad, it depends on the toughness and tensile properties.
 water supply pipe

Water supply, water supply used to do is self-evident, of course, there are some for irrigation, drainage and the biggest difference lies in the need to be able to withstand the pressure, if it is for a water supply project is concerned, we still need health indicators, non-toxic and pollution-free detection indicators.

Very different, tubing and connections work pressure and hygiene standards are not the same, the drainage must not be used for water supply, but water you can use to do the drainage, but a lot more expensive.

2016年8月25日星期四

Installing Poly-Pipe

We are Founded in 1988, we have our main mission to develop plastic water saving products and expand irrigation saving system .Our company is equipped with advanced irrigation system machine ,plastic injection machine and plastic pipe production lines .Agriculture Pipe is our products.All the products are high quality with best price ,we are well known by domestic customers and building longtime cooperation .

Installing Poly-Pipe

Materials required for poly-pipe installation include

Tractor with furrower tool and unspooling bracket

Poly-pipe rolls

Pump or valve for connection

Agriculture Pipe
Clamps, rubber straps, or duct tape

Shovel

PVC connectors (if more than one roll is used)

Hole puncher with plugs

Prior to poly-pipe installation, fields should be leveled. Poly-pipe should be installed only on flat surfaces or down-hill, never up-hill. A minimum of 6 inches of wa-ter head (water surface height above the pipe) is required for poly-pipe use.

Poly-pipe installation steps are as follows:

1.Open the box containing the poly-pipe roll and check pipe condition.

2.Use a furrower to dig a trench (Fig. 1). (A furrower is a V-shaped cutting blade with wings that deflect soil upward and away from the center point of the V to form a ridge or furrow.) The furrow should be deep enough to accommodate about 50% of the poly-pipe’s diameter and 100% of its width to avoid any rolling to the side. The trench should be built up to an elevation slightly higher than that of the irrigated furrows to avoid water return. If the field block is curved along its edge, the curve should be no sharper than 70o, preferably with an 8-foot radius.

Using Flexible Pipe (poly-pipe) with Surface Irrigation

Welcome to contact us,if you need Drip Irrigation Pipe,please visit tongdapvcpipe.com

Aimed at farmers and irrigators who want to ir-rigate their crops using flexible plastic pipes (com-monly called “poly-pipe”), this publication high-lights (1) advantages of using poly-pipe, (2) factors to consider in selecting such pipe, and (3) consider-ations for installing it.

Advantages of Using Pipes to Deliver Irrigation Water

Using pipe systems (rather than earthen ditches) to convey and distribute water to fields has several advantages:

Increases in on-farm irrigation efficiency, by avoiding water loss due to deep percolation from earthen conveyance ditches.

                       Drip Irrigation Pipe

Better irrigation control. Fluctuations in ir-rigation-canal water levels are common. Using earthen ditches and siphon tubes requires in-tensive labor to avoid water spillage as a result of such fluctuations (for example, siphon tubes may lose their vacuums and stop working). In contrast, a pipe-irrigation system needs only to have an outlet opened to deliver water through the pipe to furrows; irrigation can be left unat-tended, even when fluctuations in water levels occur.

Assistant Professor and Extension Agricultural Engineering Specialist (Irrigation and Water Management); Extension Associate – Biological and Agricultural Engineering Department; Texas Cooperative Extension, The Texas A&M University System

Labor savings. In the Rio Grande Valley, water is distributed through canals coming from the river and is delivered at different outlets (called turnouts). Systems are designed to deliver one “head” of water at each turnout (one head equals approximately 3 cfs or 1,346 gpm). One turnout is installed for each 40-acre field. Farm-ers may have field-blocks larger than 40 acres, and sometimes farmers may irrigate several fields at the same time. With pipe-irrigation sys-tems, one irrigator can control six to eight irriga-tion fronts.

2016年8月24日星期三

PVC Converting

The PVC resin industry, the PVC additive manufacturers and the PVC compounding & converting industry are closely associated with each other, and are often collectively referred to – in short hand - as the ’PVC industries’.
The total PVC production and conversion industry in Western Europe comprises more than 21.000 companies with more than 530.000 jobs and a turnover of more than 72 billion euro.

The industry can be roughly divided into four groups: PVC polymer producers, stabiliser producers, plasticiser producers, and PVC converters.

We professional produce pvc drainage pipe,welcome to contact us.

Worldwide View on PVC

pvc water pipe
A confirmation that PVC can integrate high technical performance, environmental benefits, as well as cost advantages comes from a study conducted in three key application areas: windows frames, flooring and piping.




2016年8月23日星期二

pvc drainage pipe supplier

We are pvc drainage pipe supplier,if you need pvc drainage pipe,please send us email
1. Qualitative light, convenient transportation and handling, PVC tube material handling, loading and unloading very light, convenient construction, can save artificially.
2. PVC pipes resistance to chemicals fine. PVC tube has excellent acid and alkali resistance, corrosion resistance, chemical industry, very suit fo the purpose.
3. PVC tubing fluid resistance small. The surface is smooth, PVC pipe of the small resistance, the rough coefficient, only for other pipe anti-moss low, the flow in the same diameter.
4. PVC pipe mechanical strength: PVC pipe pressure strength of resistance, resistance of the copressive
Strength, impact resistance strength are very good, applicable to all kinds of conditions of piping project.
5. PVC tubing does not affect the water.
6. PVC construction simple. PVC pipe junction construction of the rapid construction cost is low
pvc drainage pipe supplier

Hygienic, nontoxic, without secondary pollution: No filthy, alga nor other microorganisms will be caused in the process of using; Can avoid the secondary pollution caused by rust water filth of the zincification pipe.
Strong in anti-corrosion: Resisting most of the strong acids and alkalis, free from the affect of corrosive soil and soda acid liquid.
Wide water flow: Smooth both in inner and outer wall, without accumulated filth and little friction coefficient.
Convenient for installation: The material density is only 20% of the steel products, easy in handling
Long life for use: With advanced process, the product is highly compression resisting, offering high tensile strength and good in maintaining quality

pvc Cold Water Supply Pipe

1.Professional pvc Cold Water Supply Pipe manufacturer.open model ability
2.Powerful OEM ability
3.High quality, reasonable&competitive price
4.Fast delivery time,free sample and  more than 5000 tons stock
5.area of 250.000 square meters,over 170 injection machines.more than 400 employees.
pvc Cold Water Supply Pipe
6.Professional team on QA/QC and open model,adjust model
Standards of UPVC Testing Material
Index NameUnitIndex
Colour  Grey
Densitykg/m31330-1460
Vicat Softening TemperatureºC>=80
Hydraulic Test No break,no leakage
Longitudinal Reversion%
<=5
Dichloromethane Soaking  No damage on surface of sample

drip irrigation pipe supplier

drip irrigation pipe supplier Benefits
1.The combination of watering and fertilization avoids pesticide poisoning caused by micro springkling.Drip irrigation saves water and fertilizers,improves efficiency of irrigation,and reduces planting cost.
2.It controls earth temperature and humidity and keeps soil from hardening.
3.The function of salt removing not only improves growing environment of crops,but keeps groudwater and surroundings from polluction as well.
4.It protects crop from disease and thus makes green food;It reduces crop growing period and increase crop yield.
5.The crops grow balanced due to outstanding water distribution uniformity.
drip irrigation pipe supplier

SpeciaficationData
Diameter16mm
Wall thickness0.18mm-0.6mm
Working pressure1 bar
Bursting pressure2.7-3 bar
Flow rate0.85,1.0,1.1,1.16,1.4,2.5,3.0L/H
Dripper spacing10cm-50cm
Roll length1000m,2000m

Product features
 
1Split style water outlet impede root intrusion
2Highly resistant to plugging due to the multiple inlet filters
3Low CV index and pressure compensated
4Seamless construction makes the tape stronger nd resistance to mechanical stretch
5UV resistant to make drip tape anti-aging and recyclable
6Unique white line mark line for easy installation

China PVC pipe supplier

China PVC pipe supplier
We are China PVC pipe supplier,if you need China PVC pipe,welcome to contact us.
Features:

1).Light weight
2).Resistant to chemical fertilizers and herbicides
3).Non toxic and odorless
4).Simple and reliable installation
5).Easier construction,lower cost(33% less).
6).Up to 60 years' durabillity
7).Smooth interior structure,low friction losses
8).Easy maintenance.

Application:
1)Water supply
2)indoor and out door drainage


DescriptionSize(inch)Thickness(mm)Pcs/bagPacking size(m)Weight(g/m)
ASTM SCH40
PVC PIPE
(Water Supply)
1/2"1.73040.0220.022170
1/2"1.93040.0220.022188
1/2"2.773040.0220.022275
3/4"1.92040.0270.027250
3/4"2.02040.0270.027264
3/4"2.872040.0270.027380
1"2.21440.0340.034360
1"2.41440.0340.034390
1"3.381440.0340.034550
1-1/4"2.71040.0430.043550
1-1/4"3.561040.0430.043685
1-1/2"3.2640.0490.049750
1-1/2"3.68640.0490.049850
2"3.91440.0610.0611150
2"4.2440.0610.0611220
2-1/2"5.16340.0740.0741810
3"5.49240.0890.0892350
3"5.7240.0890.0892440
4"6.02140.1150.1153400
4"7.3140.11440.11443790
ASTM SCH80
PVC PIPE
(Water Supply)
1/2"3.73040.02140.0214315
3/4"3.92040.02680.0268410
1"4.61440.03360.0336624
1-1/4"4.91040.04230.0423856
1-1/2"5.1640.04830.04831070
2"5.5440.06040.06041400
2-1/2"7.1440.07320.07322337
3"7.6140.08890.08892994
4"8.6140.08890.08894000

2016年8月22日星期一

Drip Irrigation Pipe

Drip Irrigation Pipe
Dripper sorting & conveying system
This drip irrigation pipe line adopted centrifugal screening device for drippers screening & sequence. With below advantages,:
(1)High precision screening
(2) Dripper identifying speed 400pcs/min
which ensure the precise dripper supply during high speed production.
Drip Irrigation Pipe

Punching system
(1)The round drip irrigation pipe line adopted mechanical punching mode, automatically tracking the pipe production speed, guaranteed the accuracy of punching position.
(2)2 or 4 or 6 Holes punching
(3) Punching speed: 400pcs/min

Water Supply Pipe Supplier


We are Water Supply Pipe Supplier,if you need our products,you can contact us.
Five layer anti oxygen pipe production line,with five extruder for PERT,EVOH and ahesive,one vacuum forming box and spray cooling box,tractor,printer,cutter and double station winder.Pipe can be used for water supply,hot water supply.

Hot Tags: Plastic Pipe Extrusion Line,Pert Five Layer Antioxygen Water Supply Pipe Extrusion Line Sj65, PERT Five Layer Antioxygen Water Supply Pipe Machine, PERT Five Layer Antioxygen Water Supply Pipe Extruder, China, Manufacturers, Suppliers, Factory

Plastic HDPE Water Supply Pipe Production Line / Extruder Machine
Water Supply Pipe Supplier

The extrusion line is newly developed based on European technique of new type pipe production line.

It’s suitable for PE , PP and other polyolefine pipes high-speed extrusion.
The extrusion line has many advantages, such as, nest outline , highly automatic control . stable performance.
It’s greatly reputed by the customers due to “European performance and domestic.

PE pipe production line contains single screw extruder, mould, single screw extruder (for mark line), calibrating tank, cooling tank, haul-off, cutter and stacker.

Description:

Our Single screw extruder is very suitable to process PE resin with high capacity, max capacity can reach 1000kg/h
The production line adopts reasonable design, absorbing safe producing technology, acquiring CE certificate.
Diameter range is 16mm-800mm, which can be changed into inch standard to meet special requirement.

pvc Cold Water Supply Pipe

1. pvc Cold Water Supply Pipe
2. material : UPVC,CPVC
3. standard: ASTM,DIN,BS
4.for water supply pipe
PVC-water supply-pipe fitting

2. material : CPVC & UPVC
3. suitable temperature

--- CPVC: suible for cold and hot water supply

--- UPVC: suible for colod water supply

4. sizes: 1/2",3/4",1",1-3/4",1-1/2",2",2-1/2",3",3-1/2",4",5",6"
pvc Cold Water Supply Pipe
5. stardard: ASTM,DIN,BS

agriculture irrigation pipe

agriculture irrigation pipe Description:
we on the base of the original round dripper inlet irrigation pipe, absorbing and digesting the similar advanced technology of production line, developed the third generation extrusion production line. This production line has many advantage, such as high extruding speed, high accuracy of perforating and higher performance with lower cost.

The PE Round drip irrigation pipe production line is mechanotronics, with the advantages of:
1) high production efficiency;
2) reasonable structure compact;
3) convenient operation and maintenance
agriculture irrigation pipe
4) long use life etc.


Dripper specification
  DN6.8, DN 12, DN 16, DN 20
wall thickness
0.5-1.5mm
dripper space
         200-1000mm
Punching frequency
Max250pcs/min
Inserting speed of dripper
         Max300pcs/min
Extrusion speed
80-120m/min
Main extruder
       SJ65/33   SJ75/33
Type of dripper
round
Water flow
                2~4L/H
Center height
1000mm

pvc drainage pipe factory

We have pvc drainage pipe factory,welcome to contact us.
Specifications: Plastic Pipe Extrusion Line For PVC pipe production line to making pvc drainage pipe

pvc drainage pipe factory
Our machine can produce the PVC pipe with diameter from 16mm to 630mm ;

PVC Pipe Diameter
16-40mm dual 
20-63mm dual 
Extruder mode 
SJZ51/105 
SJZ65/132 
Extruder power
18.5kw AC 
37kw AC 
Max lineal speed
0.5-10  m/min
0.5-15 m/min
Max capacity 
120kg/h
250kg/h

PVC Pipe Diameter
20-63 mm
75-200mm
160-315 mm
315-630mm 
Extruder mode 
SJZ51/105 
SJZ65/132 
SJZ80/156 
SJZ92/188 
Extruder power
18.5kw AC 
37kw AC 
55kw AC 
110kw DC 
Max lineal speed
0.5-10 m/min
0.5-8 m/min
0.5-6 m/min
0.5-4 m/min
Max capacity 
80-120kg/h
180-250kg/h
280-350kg/h
500-600kg/h

Temperature meter
Omron
Contactor
SIEMENS/Schneider
Relay
SIEMENS/Schneider
Transducer
ABB/DELTA
Power light, button
SIEMENS/Schneider
Inverter
SIEMENS/ABB/DELTA
Main Motor
SIEMENS